5.10.2013

DIY Fathers day gift - stenciled glass plate

 Hey Brassy Apple readers!  I'm excited to be joining Megan's team here and hope to give you some great ideas over the next few months on creating and having fun with your kids! Today's project was done with Father's Day in mind, but it could be changed up for any occasion.
You'll need: A smooth, clear glass plate (this came from IKEA for 99c) Rubbing alcohol, or eye glass cleaning wipe Glass paints (like Gloss Enamels by DecoArt) Paint brushes...stencil brushes work best  Stencil cut out of vinyl or contact paper with the word you want to paint on your plate, DAD in our case  (remember to make it in reverse because it goes on the back of the plate) Directions: Clean backside of plate with rubbing alcohol.  When dry, adhere stencil to the back center of the plate.
 Choose your paint colors.  I decided to use 3, one to represent each child.  Squirt a small amount onto a piece of foil and help children paint inside the stencil on the plate.  I had each child do one letter. 
Pull up the stencil while the paint it still wet, or it will stick to the stencil and peel off of the plate.
To set the paint you will do two rounds of baking.  Set plate in cool oven and heat to 325.  Then start timer for 30 minutes, turn off oven at the end of 30 minutes and let the plate cool in the oven.  Repeat this process again and the paint will be permanent and dishwasher safe.   Now we have a great little plate for Dad that represents each of his kids, and he can actually eat off of it too!  If you use this technique on a plate, I'd love to see the result. I'll also show you the first version I tried, which came out really cool, but had some difficulties   Alternating colors we did several layers of paint dots (using the handle of a small paint brush)  I used a hair dryer to speed the drying process between each layer.  When each letter was completely filled in with dots, I went to pull up the stencil, and yep--the paint was coming up with it!  I had to cut all around the outline of the letters with an exacto knife to remove the stencil.  So if you want to go a more detailed route with your paint, be ready to cut around everything, and the lines might not be totally perfect.  
Photobucket
Now load up the finished plate with some of Dad's favorite treats, or his requested dinner!

(get more great DIY tutorials from Steph at Crafting in the Rain) 

Pin It!

3 comments:

  1. I would love to do this, but is it possible to use a Corelle plate and do the art on the surface? I just have a tendency to break anything but Corelle!

    ReplyDelete
    Replies
    1. Hey Naomi...I haven't tried it, but it should work. However, the paint isn't food grade, so technically isn't supposed to be in direct contact with food. You could make it a decorative plate only, or only serve things on it that are wrapped or have liners, like cupcakes. Hope that helps!

      Delete
  2. Interesting post and thank you for sharing. There are things here that I have not thought before.Thanks to make such a cool post which is really very well written.will refer a lot of friends about this. Keep blogging.
    florist online

    ReplyDelete